The AppleTalk LaserWriter “^1” could not be found on the network. Check that both the Macintosh and the LaserWriter are properly connected to AppleTalk.
The connection was interrupted while communicating with the AppleTalk LaserWriter “^1”. Check all AppleTalk connectors and try again.
The printer driver for the selected printer cannot be located. Make sure the driver named “^2” is in the System Folder of the startup disk.
The System file on the startup disk is not current enough for this application to run. Try using a more recent startup disk.
The selected printer has a spooler attached to it. This application cannot operate on printers with spoolers. Use the Chooser to select another AppleTalk LaserWriter.
The selected printer has a hard disk attached to it, but it is not initialized. If you would like to initialize it, choose the Initialize Printer’s Disk… item in the File menu.
No printer is selected. Use the Chooser to select an AppleTalk LaserWriter.
The printer’s disk(s) could not be initialized. Make sure all disks are ON and properly connected to the printer. Restart the printer and try initializing again.
The LaserWriter’s password must be set to 0 in order for this application to operate properly. Reset the password to 0 and try again.
A PostScript error has occurred in the LaserWriter. Restart the printer and try again.
There is no more memory in the LaserWriter available for font storage. Restarting the printer will remove all downloaded fonts from the printer’s memory.
The space on the printer’s disk allocated for font storage is full.
Only a limited number of font files may be open at once. Download the current list and then return to this dialog to download the rest.
The disk that this font is on may be damaged. Transfer the font to another disk before downloading it.
Missing application resources are preventing normal program operation.
This disk could not be formatted. Please use another disk.
This disk is not the first disk of the backup set.
This disk is not part of the backup set.
This disk is part of the backup set, but it is not the one now being requested.
This disk is not formatted.
This disk is either not part of the backup set, or important files on the disk have been changed.
This disk is part of a backup set that was not completed successfully.
This disk is part of a complete backup set, but it is from a backup of a different font.
The copy on the printer’s hard disk of the font to be backed up is damaged. A backup copy cannot be made.
This disk is missing files or has been damaged. The restoration of the ^2 font cannot continue.
There has been an error reading the floppy disk. The restoration of the ^2 font cannot continue.
Disk error! The restoration of the ^2 font cannot continue.
An error occurred while writing to the printer’s hard disk. Either the disk is not big enough to hold the ^2 font, or the disk is damaged.
Disk error! The backup of the ^2 font cannot continue.
There has been an error reading the floppy disk. The backup of the ^2 font cannot continue.
The Backup and Restore features can only be used on systems which have the Hierarchical File System (HFS) in the ROMs.
The currently selected printer is not a LaserWriter. Please select a LaserWriter with the Chooser.
There isn’t enough memory for the LaserWriter Font Utility to run. Try enlarging the memory partition with the Finder’s Get Info command.
The font “^0” is already in the download list.
The file “^0” contains no downloadable fonts.
All of the fonts in the file “^0” are damaged and cannot be downloaded.
All of the fonts in the file “^0” are already in the download list.
None of the fonts in that file could be added to the download list because some are damaged and the others are already in the list.
Some of the fonts in the file “^0” were not added because they are already in the download list.
Some of the fonts in the file “^0” were not added to the download list because they are damaged.
Some of the fonts in that file were not added to the download list because they are damaged, and others are already in the list.
The PostScript font in the file “^0” is damaged.
The printer driver for the selected printer cannot be located. Make sure the driver named “^2” is in the Extensions Folder of the startup disk.
The printer “^0” does not have enough memory available to allow TrueType™ fonts to be downloaded.
An error occurred while attempting to add the fonts in the file “^0”. No fonts were added.
